92549 Plastic Repair Kit - Rechargeable

CE Approved RoHS Chargable via USB Product Video available

Cordless plastic repair kit, including welding tip hot stapling function, welding rods, wire mesh, stand & USB charging cable.

  • Comprehensive plastic repair kit with rechargeable Li-ion battery (2400mAh).
  • Contents include: hot staple tip, plastic welding tip (max temp 500°C), plastic welding tip with welding rod guide, 12 plastic welding rods 150mm (ABS,PP,PE,PS), 3pc stainless steel wire mesh (50 x 100mm) & flat alloy steel staples (50pcs 0.8mm & 50pcs 0.6mm).
  • Complete with stand, cap, cover & USB charging cable.
  • Charging time 3.5 hours; one charge provides 35 mins of use on plastic welding function, or 150-200 staples on hot staple function.
  • Internal charging board protects against overcharging, short circuit and Electro Static Discharge.
TSP: £100.00 ex VAT £120.00 inc VAT

Kabelloses Kunststoff-Reparaturkit, mit Schweißspitzen-Heißheftfunktion, Schweißstäben, Drahtgitter, Ständer und USB-Ladekabel.

  • Umfassendes Kunststoff-Reparaturkit mit aufladbarem Li-Ionen-Akku (2400 mAh).
  • Im Lieferumfang enthalten: Heißheftspitze, Kunststoff-Schweißspitze (max. Temp. 500 °C), Kunststoff-Schweißspitze mit Schweißstabführung, 12 Kunststoff-Schweißstäbe 150 mm (ABS, PP, PE, PS), 3 St. Edelstahl-Drahtgitter (50 mm x 100 mm) und flache Leichtmetall-Heftklammern (50 St. à 0,08 mm und 50 St. à 0,06 mm).
  • Komplett mit Ständer, Kappe, Abdeckung und USB-Ladekabel.
  • Ladedauer 3-5 Stunden. Eine Ladung ermöglicht 35 Minuten Betrieb der Kunststoff-Schweißfunktion oder 150-200 Klammern mit der Heißheftfunktion.
  • Interne Ladeplatine schützt vor Überladung, Kurzschluss und elektrostatischer Entladung.
TSP: £100.00 ex VAT £120.00 inc VAT

Kit de réparation de plastiques, sans fil, avec fonction de soudage par agrafage à chaud et embouts de soudage, baguettes de soudage, treillis métallique, support et câble de recharge USB.

  • Kit de réparation de plastiques complet, avec batterie Li-ion rechargeable (2 400 mAh).
  • Comprend : embout de soudage par agrafage à chaud, embout de soudage plastique (temp. max. 500 °C), embout de soudage plastique avec guide de baguette de soudage, 12 baguettes de soudage plastique 150 mm (ABS, PP, PE, PS), 3 treillis en acier inoxydable (50 x 100 mm) et agrafes plates en alliage (50 agrafes de 0,8 mm et 50 de 0,6 mm).
  • Fourni avec socle, capuchon, couvercle et câble de recharge USB.
  • Temps de recharge 3 - 5 heures ; une charge permet 35 min. d'utilisation en mode fonction de soudage plastique, ou 150-200 agrafes en mode agrafage à chaud.
  • Carte de charge interne de protection contre le risque de surcharge, de court-circuit et de décharge électrostatique.
TSP: £100.00 ex VAT £120.00 inc VAT

Draadloze kunststof reparatieset, omvat laspunt met warme nietfunctie, lasdraden, draadgaas, standaard en USB-laadkabel.

  • Uitgebreide kunststof reparatieset met oplaadbare Li-ion batterij (2400mAh).
  • Inhoud: warme nietpunt, kunststof lastip (max. temperatuur 500°C), kunststof lastip met lasdraadgeleider, 12 kunststof lasdraden 150 mm (ABS, PP, PE, PS), 3 stuks roestvrijstalen draadgaas (50 x 100 mm) en platte stalen nietjes (50 stuks 0,08 mm en 50 stuks 0,06 mm).
  • Compleet met standaard, dop, deksel en USB-kabel.
  • Oplaadtijd 3,5 uur; één lading biedt 35 minuten gebruik op de kunststof lasfunctie, of 150-200 nietjes op de warme nietfunctie.
  • Het interne laadboard biedt bescherming tegen overlading, kortsluiting en elektrostatische ontlading.
TSP: £100.00 ex VAT £120.00 inc VAT
CE Approved RoHS Chargable via USB Product Video available
 Buy Locally

Useful Downloads
Press Release
Rechargeable battery-powered plastic welder repair kit

Due to the high costs associated with the replacement of plastic panels (bumpers, inner wings, headlamp bodies, engine covers, motorcycle bodywork, etc), this new rechargeable battery-powered plastic welder repair kit from Power-TEC (part number 92549) was developed to repair small to medium sized damage that could render a panel unusable.

The tool is supplied with two types of quick-change plastic welding attachments: a standard plastic welding tip plus a plastic welding tip fitted with a filler rod feeding tube. Usefully, by another change of attachment, it becomes a hot stapler, making the new kit a complete solution for quick and easy plastic panel repairs.

This plastic welding tool is particularly convenient and versatile as it is cordless and powered by a lithium-ion battery (2400mAh) which is rechargeable via a convenient USB port on a PC, laptop, power bank or USB adaptor. An LED torch function is also included which also indicates that the welding tool heat control is switched on.

The kit also comes with a range of consumables which makes it instantly ready for use: three sheets of stainless steel wire mesh (50mm x 100mm); four types of plastic welding filler rods (3 rods in each pack) suitable for PE (polyethylene), ABS (acrylonitrile butadiene styrene), PP (polypropylene) and PS (polystyrene) plastics; plus two sizes of stainless steel staples, 50 x 0.6mm and 50 x 0.8mm. All these consumables can be purchased separately to keep your kit fully stocked.

The tool is easy to use, it heats up quickly and everything you need is supplied in a convenient case ready to take straight to the job. Available now from your Power-TEC supplier.



Buy Online from