1. Home
  2. Products
  3. Cars & Vans
  4. Bodywork
  5. Dent Removal
  6. PDR
  7. PDR Lever Pulling Bar - 660mm with Aluminium Pad Puller

92730 PDR Lever Pulling Bar - 660mm with Aluminium Pad Puller

Product Video available

A dent pull lever bar, supplied with an assorted set of glue puller pads and pad holder, for use as part of a PDR hot glue repair to remove dents in vehicle bodywork without causing damage to the paintwork. It features a pivoting rubber foot pad, an adjustable lifting point with 250mm of fore and aft movement, a height adjustable pad holder with integral ball-joint.

  • Adjustable leverage bar to pull larger dents from vehicle bodywork panels, doors & bonnets etc. without causing damage to paintwork, as part of a PDR glue repair.
  • Lever length: 660mm. Foot (pull-plate) measurements: 120 x 120mm.
  • Kit includes: 6x assorted glue puller pads (Part No. 91557). 1x 125mm straight pad holder.
  • Suitable for use with Power-TEC Gluematic Glue Gun, Part No. 91237 & glue sticks, Part No. 92342.
  • For the removal of the glue after use, please see Power-TEC Hot Melt Glue Remover, Part No. 92341.
List Price: £198.00 ex VAT £237.60 inc VAT

Ausbeul-Hebelstange, geliefert mit einem Satz Klebepads und Padhaltern, zur Verwendung als Teil einer Heißklebereparatur für das lackierfreie Ausbeulen, um Beulen ohne Beschädigung der Lackierung aus der Fahrzeugkarosserie zu entfernen. Mit schwenkbarem Gummifußpolster, einem verstellbaren, um 250 mm nach vorne und hinten einstellbaren Hebepunkt, sowie einem höhenverstellbaren Padhalter mit integriertem Kugelgelenk.

  • Verstellbare Hebelstange zum Herausziehen größerer Beulen aus Karosserieblechen, Türen, Motorhauben usw. ohne Beschädigung des Lacks, als Teil eines lackierfreien Ausbeulens.
  • Länge des Hebels: 660 mm. Fußmaße (Zugplatte): 120 x 120 mm.
  • Inhalt des Satzes: 6 sortierte Auszieher-Klebepads (Teile-Nr. 91557). Ein 125 mm gerader Padhalter.
  • Geeignet für den Einsatz mit der Power-TEC Gluematic Klebepistole, Teile-Nr. 91237, und Klebestiften, Teile-Nr. 92342.
  • Für die Entfernung des Klebstoffs nach der Verwendung siehe Power-TEC Heißkleber-Entferner, Teile-Nr. 92341.
List Price: £198.00 ex VAT £237.60 inc VAT

Barre de traction à levier pour débosselage, fournie avec un assortiment de pastilles à coller et porte-pastilles, à utiliser dans le cadre d'un débosselage DSP à la colle chaude pour éliminer les bosses sur la carrosserie du véhicule sans endommager la peinture. Équipée d'un repose-pieds pivotant en caoutchouc, d'un point de levage réglable avec 250 mm de mouvement avant et arrière, d'un porte-pastilles réglable en hauteur avec articulation à rotule intégrée.

  • Barre de levier réglable pour éliminer les plus grosses bosses des panneaux de carrosserie, portières et capots, etc., sans endommager la peinture, dans le cadre d'un débosselage DSP à la colle .
  • Longueur du levier : 660 mm. Mesures au pied (plaque de traction) : 120 x 120 mm.
  • Le kit comprend : Assortiment de 6 pastilles à coller (Référence 91557). 1 porte-pastilles droit 125 mm.
  • Utilisable avec le pistolet à colle Power-TEC Gluematic, référence 91237, et bâtons de colle, référence 92342.
  • Pour retirer la colle après utilisation, voir le dissolvant de colle chaude Power-TEC, référence 92341.
List Price: £198.00 ex VAT £237.60 inc VAT
Product Video available
 Buy Locally
Buy Online
Related Products Downloads Press Release
Useful Downloads

Press Release
Precision pulling power: New PDR Lever Bar from Power-TEC delivers controlled dent removal
Precision pulling power: New PDR Lever Bar from Power-TEC delivers controlled dent removal

Power-TEC continues to innovate in the PDR (Paintless Dent Removal) world with the introduction of its new Lever Pulling Bar with Aluminium Pad Puller (part number 92730), a tool designed to offer bodyshop professionals and PDR specialists controlled pulling force for both minor and more challenging dent repairs—without compromising factory paint finishes.

This 660mm leverage bar is designed for use as part of a hot glue-based PDR process. Ideal for addressing dents on panels, doors, bonnets and other vehicle bodywork, the tool comes equipped with a pivoting rubber foot pad for stable support, and a ball-jointed, height-adjustable pad holder that delivers smooth, accurate pulling action.

A key feature of the bar is its adjustable lifting point—offering 250mm of fore and aft movement—giving the operator complete control over the amount and direction of force applied. This allows for fine, gradual correction of shallow dents, or more assertive leverage where required on deeper indentations.

The tool is supplied as a complete kit including six assorted glue puller pads and a 125mm straight pad holder, making it compatible right out of the box with popular PDR equipment such as the Power-TEC Gluematic Glue Gun (part number 91237) and glue sticks (part number 92342).

Whether you're fine-tuning a shallow crease or tackling a more stubborn panel dent, the Power-TEC Lever Pulling Bar delivers professional results with precise control and minimal surface disruption.

Now available from your local Power-TEC supplier. For further information about other professional bodyshop tools, or for details of your nearest Power-TEC stockist, contact our customer service team: 01926 815000. 

Buy Online from
Buy 92730 PDR Lever Pulling Bar - 660mm with Aluminium Pad Puller from Amazon As an Amazon Associate I earn from qualifying purchases.
Buy 92730 PDR Lever Pulling Bar - 660mm with Aluminium Pad Puller from The Tool Academy LTD